TOYOTA
COROLLA
2010–
TVIP V4
PROCEDURE
REMOTE ENGINE STARTER (RES)
Page 24 of 46
Issue: A 03/12/10
Rotate the Grommet to gain
c)
access to the Large Rubber
Nipple.
Secure the Pin Terminals
d)
from the Hood Switch
Harness to the Wire Routing
Tool with Electrical Tape.
Cut the Large Nipple.
e)
NOTE:
Do not cut the
Small Nipple.
CAUTION:
Do not damage the
Pin Terminals.
Pull the Hood Switch
f)
Harness through the
Large Hole.
Remove the Tape securing
g)
the Hood Switch Harness to
the Wire Routing Tool