TOYOTA
COROLLA
2010–
TVIP V4
PROCEDURE
REMOTE ENGINE STARTER (RES)
Page 21 of 46
Issue: A 03/12/10
Route the Red Wire and
d)
secure it with 3 Wire Ties
to the Vehicle Harness.
Use a Splicing Connector to
e)
secure the V4 Red Wire to
the Wire from Pin 1 on the
40P Vehicle Connector.
Bundle up the excess TVIP
f)
wire and secure to the
Vehicle Harness with
1 Wire Tie.
6) V4 Harness Installation.
(Steering Column)
Disconnect the 8P IG
a)
Connector.
Remove the Tape securing
b)
the 8P IG Connector’s Wires
and the Black 2P Connector
Harness.
Re-Tape the Black 2P
c)
Connector Wires.
Do not secure the 8P IG
•
Connector’s Wires.
Plug the V4 8P Connectors in
d)
between the Vehicle’s 8P IG
Connectors.
