Toyota LAND CRUISER LC200, Owner'S Manual

Page: 455 / 973

453
4-5. Using the driving support systems
4
D
riv
in
g
LC200_OM_OM60R59W_(WE)
● When any part of the vehicle sags
When any part of the vehicle
sags due to the number of
passengers or the distribu-
tion of the load, there is a
margin of error between the
guide lines on the screen and
the actual distance/course on
the road.
■
When approaching three-dimensional objects
The estimated course lines target a flat surfaced objects (such as
the road). It is not possible to determine the position of three-
dimensional objects (such as vehicles) using the estimated course
lines and distance guide lines. When approaching a three-dimen-
sional object that extends outward (such as the flatbed of a truck),
be careful of the following.
● Estimated course lines
Visually check the surround-
ings and the area behind the
vehicle. In the case shown in
the illustration, the truck
appears to be outside of the
estimated course lines and
the vehicle does not look as if
it hits the truck. However, the
rear body of the truck may
actually cross over the esti-
mated course lines. In reality
if you back up as guided by
the estimated course lines,
the vehicle may hit the truck.
A margin of error