Toyota LAND CRUISER LC200 Owner'S Manual Download Page 85

Page: 85 / 973

1-1. For safe use

LC200_OM_OM60R59W_(WE)

Fo
r s
a

ty a

se
cu
rity

Check the positions of the
exclusive fixing bars, and install
the child restraint system to the
seat.

The bars are installed in the clear-
ance between the seat cushion
and seatback.

If the child restraint system has a
top strap, the top strap should be
latched onto the anchors.



Second outboard seats

Secure the child restraint sys-
tem using a seat belt or ISOFIX
rigid anchors, and move the
head restraint in place at the
upmost position.

Open the anchor bracket cover,
latch the hook onto the anchor
bracket and tighten the top
strap.

Make sure the top strap is securely
latched.

Child restraint systems with a top strap (vehicles with anchor
bracket)

Summary of Contents for LAND CRUISER LC200














































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for LAND CRUISER LC200

Reviews:

Related manuals for LAND CRUISER LC200

Brands by name

Popular brands

Toyota LAND CRUISER LC200, Owner'S Manual

Search results

Summary of Contents for LAND CRUISER LC200

Reviews:

Related manuals for LAND CRUISER LC200

Brands by name

Popular brands