Toyota LAND CRUISER LC200, Owner'S Manual

Page: 927 / 973

925
9-1. Specifications
LC200_OM_OM60R59W_(WE)
9
V
e
h
icl
e s
p
e
c
ific
at
io
ns
 3UR-FE engine (for EURO IV and later models
*
1
)
* 1
: EURO IV is an emission standard. If it is not clear that your vehicle meets
relevant standards, contact your Toyota dealer.
* 2
: The engine oil capacity is a reference quantity to be used when changing
the engine oil. Warm up and turn off the engine, wait more than 5 minutes,
and check the oil level on the dipstick.
■
Engine oil selection
“Toyota Genuine Motor Oil” is used in your Toyota vehicle. Use
Toyota approved “Toyota Genuine Motor Oil” or equivalent to satisfy
the following grade and viscosity.
Oil grade:
0W-20, 5W-20, 5W-30 and 10W-30:
API grade SL “Energy-Conserving”, SM “Energy-Conserving”, SN
“Resource-Conserving” or SN PLUS “Resource-Conserving”; or
ILSAC multigrade engine oil
15W-40:
API grade SL, SM, SN or SN PLUS multigrade engine oil
Recommended viscosity (SAE):
If you use SAE 10W-30 or a
higher viscosity engine oil in
extremely low temperatures,
the engine may become difficult
to start, so SAE 0W-20, 5W-20
or 5W-30 engine oil is recom-
mended.
Oil capacity
(Drain and refill

reference
* 2
)
With filter
Without filter
7.5 L (7.9 qt., 6.6 Imp.qt.)
7.1 L (7.5 qt., 6.2 Imp.qt.)
Temperature range anticipated
before next oil change