Toyota LAND CRUISER LC200, Owner'S Manual

Page: 498 / 973

496
4-5. Using the driving support systems
LC200_OM_OM60R59W_(WE)
● Slip display
When tire slippage is
detected, the tilt meter dis-
play area is automatically
switched to the slip display.
Tire display
Indicates the position of
freely spinning tires in yel-
low if the tire spins.
(During Crawl Control is
operating, all of the tires
are indicated in yellow.)
Pop-up display of the Toyota parking assist-sensor
Displayed if an obstacle is detected while the Toyota parking
assist-sensor is turned on.
Pop-up display of the RCTA
Displayed if a vehicle approaching from right or left rear of the
vehicle is detected while the RCTA is turned on.
■ Front view & dual side view display
The screen can be displayed when the shift lever is in P, D or N.
■
Front view rotating display function
● The vehicle inclination displayed on the screen may differ from the actual
state.
●
When the rotated screen is displayed, the corners of the front bumper may
not be seen on the screen.
■ Tilt meter display
●
The display indicates the incline of the vehicle in degrees shown by the
movement of the pointer and the rotation of the vehicle image.
● The color of the degree markers of incline to the front, rear, left and right
changes according to the current incline of the vehicle.
●
After the engine switch is turned to IGNITION ON mode, the degree of
incline is not displayed until such information is determined.
● The degree of incline showed on the tilt meter is only an approximate indica-
tion, and may differ from the degree of incline measured using other equip-
ment.
■ Tilt meter/slip display
When the Toyota parking assist-sensor or RCTA detects an obstacle or
another vehicle, a warning message pops up in the tilt meter/slip display
area.
1
2
3