Toyota IQ 2012 Owner'S Manual Download Page 90 | Manualshive

Page: 90 / 476

background image

90

1-3. Adjustable components (seats, mirrors, steering wheel)

iQ_WE_74014E

CAUTION



When children are in the vehicle

Do not allow children to play with the seat belt. If the seat belt becomes
twisted around a child’s neck, it may lead to choking or other serious injuries
that could result in death.
If this occurs and the buckle cannot be unfastened, scissors should be used
to cut the belt.



Seat belt pretensioners

If the pretensioner has activated, the SRS warning light will come on. In that
case, the seat belt cannot be used again and must be replaced at any autho-
rized Toyota dealer or repairer, or another duly qualified and equipped pro-
fessional.



Seat belt damage and wear



Do not damage the seat belts by allowing the belt, plate, or buckle to be
jammed in the door.



Inspect the seat belt system periodically. Check for cuts, fraying, and loose
parts. Do not use a damaged seat belt until it is replaced. Damaged seat
belt cannot protect an occupant from death or serious injury.



Ensure that the belt and tab are locked and the belt is not twisted.
If the seat belt does not function correctly, immediately contact any autho-
rized Toyota dealer or repairer, or another duly qualified and equipped pro-
fessional.



Replace the seat assembly, including the belts, if your vehicle has been
involved in a serious accident, even if there is no obvious damage.



Do not attempt to install, remove, modify, disassemble or dispose of the
seat belts. Have any necessary repairs carried out by any authorized
Toyota dealer or repairer, or another duly qualified and equipped profes-
sional. Inappropriate handling of the pretensioner may prevent it from
operating properly resulting in death or serious injury.

«
...
88
89
90
91
92
...
»

Summary of Contents for IQ 2012





























































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for IQ 2012

Brand: A-Tach Mounts Pages: 2

Brand: A-Tach Mounts Pages: 2

Brand: A-Tach Mounts Pages: 2

Brand: Camcar Pages: 6

Brand: Eclipse Pages: 6

Brand: JASTEC Pages: 12

Brand: GOgroove Pages: 9

Brand: FORM FIT Pages: 2

Brand: Curt Manufacturing Pages: 6

Parrot MKi + ParrotCK3100 range LOGAN

Brand: Parrot Pages: 10

Brand: Qeedon Pages: 2

Brand: v.LOGiC Pages: 22

Brand: TrailFX Pages: 2

Brand: Acura Pages: 7

Brand: Reliant Pages: 206

Ridesmart KMA-610

Brand: KlipXtreme Pages: 12

Brand: Volvo Pages: 18

Brand: Audi Pages: 4

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands