manualshive.com logo in svg

Toyota IQ 2012, Owner'S Manual, Page: 85 / 476

Share
Download
Toyota IQ 2012 Owner'S Manual Download Page 85

85

1-3. Adjustable components (seats, mirrors, steering wheel)

1

Be
fo

re

 d

riv

in

g

iQ_WE_74014E

CAUTION

Head restraint precautions

Observe the following precautions regarding the head restraints. 
Failure to do so may result in death or serious injury.

Use the head restraints designed for each respective seat.

Adjust the head restraints to the correct position at all times.

After adjusting the head restraints, push down on them and make sure
they are locked in position.

Do not drive with the head restraints removed.

NOTICE

Before folding the seatbacks

The seat belts buckles must be stowed.

The head restraints must be removed.

When operating the rear seat

Make sure that the rear seat does not come into contact with the front seat.
Do not forcibly operate the rear seat. Otherwise, the seat cover may be dam-
aged or the seat may be broken.

Summary of Contents for IQ 2012





























































































































































































































































































































































































































































































Reviews:

No comments