manualshive.com logo in svg

Toyota IQ 2012, Owner'S Manual, Page: 428 / 476

Share
Download
Toyota IQ 2012 Owner'S Manual Download Page 428

428

5-2. Steps to take in an emergency

iQ_WE_74014E

Vehicles with a manual transmission

Depress the clutch pedal.

Touch the Toyota emblem side of
the electronic key to the
“ENGINE START STOP” switch.

Press the “ENGINE START STOP” switch within 10 seconds
after the buzzer sounds, keeping the clutch pedal depressed.

In the event that the “ENGINE START STOP” switch still cannot be
operated, contact any authorized Toyota dealer or repairer, or another
duly qualified and equipped professional.

Stopping the engine

Shift the shift lever to P and press the “ENGINE START STOP” switch as
you normally do when stopping the engine.

Replacing the key battery

As this procedure is a temporary measure, it is recommend that the elec-
tronic key battery be replaced immediately when the battery depletes. 
(

P. 357)

Summary of Contents for IQ 2012





























































































































































































































































































































































































































































































Reviews:

No comments