manualshive.com logo in svg

Toyota IQ 2012, Owner'S Manual, Page: 436 / 476

Share
Download
Toyota IQ 2012 Owner'S Manual Download Page 436

436

5-2. Steps to take in an emergency

iQ_WE_74014E

The coolant level is satisfactory if
it is between the FULL and LOW
lines on the reservoir.

Reservoir
FULL
LOW
Radiator cap

Add coolant if necessary.

Water can be used in an emer-
gency if coolant is unavailable.

Start the engine and turn the air conditioning system on to
check that the radiator cooling fan operates and to check for
coolant leaks from the radiator or hoses.

The fan operates when the air conditioning system is turned on
immediately after a cold start. Confirm that the fan is operating by
checking the fan sound and air flow. If it is difficult to check these,
turn the air conditioning system on and off repeatedly.
(The fan may not operate in freezing temperatures.)

If the fan is not operating:

Stop the engine immediately and contact any authorized
Toyota dealer or repairer, or another duly qualified and
equipped professional.

If the fan is operating:

Have the vehicle inspected at the nearest authorized Toy-
ota dealer or repairer, or another duly qualified and
equipped professional.

Summary of Contents for IQ 2012





























































































































































































































































































































































































































































































Reviews:

No comments