manualshive.com logo in svg

Toyota IQ 2012, Owner'S Manual, Page: 284 / 476

Share
Download
Toyota IQ 2012 Owner'S Manual Download Page 284

284

3-2. Using the audio system

iQ_WE_74014E

Using the steering wheel audio switches

Turning on the power

Press 

 when the audio system is turned off.

The audio system can be turned off by holding the switch down until you
hear two beeps.

Selecting the audio mode

Press 

 when the audio system is turned on. The audio mode

changes as follows each time the button is pressed.

FM1

FM2

FM3

CD

AUX

AM

Adjusting the volume

Press “

” on 

 to increase the volume and “

” to decrease the

volume.

Hold down the button to continue increasing or decreasing the volume.

Audio features can be controlled using the switches on the steering
wheel.

Operation may differ depending on the type of audio system or navi-
gation system. For details, refer to the manual provided with the
audio system or navigation system.

Volume
Radio: Select radio stations
CD: Select tracks, files
(MP3 and WMA)
Power on, select audio
mode

Summary of Contents for IQ 2012





























































































































































































































































































































































































































































































Reviews:

No comments