manualshive.com logo in svg

Toyota IQ 2012, Owner'S Manual, Page: 143 / 476

Share
Download
Toyota IQ 2012 Owner'S Manual Download Page 143

143

1-7. Safety information

1

Be
fo

re

 d

riv

in

g

iQ_WE_74014E

(1) For the child restraint system (CRS) which do not carry the ISO/

XX size class identification (A to G), for the applicable mass
group, the car manufacturer shall indicate the vehicle specific
ISOFIX child restraint system(s) recommended for each position

Key of letters inserted in the above table:

IUF: Suitable for ISOFIX forward-facing child restraint systems of uni-

versal category approved for use in this mass group

IL: It is suitable for child restraint system shown in the ISOFIX child

restraint system list.

X:

ISOFIX position not suitable for ISOFIX child restraint systems
in this mass group and/or this size class.

*

1

: When installing the ISOFIX child restraint system, set the front

seat at front-most and upright position.

*

2

: When installing the ISOFIX child restraint system on the rear

seat, adjust the front seat position so that the seat rails are com-
pletely covered by the covers bearing a triangle mark.

Cover
Triangle mark
Seat rail

Slide the front seat forward until
the seat rail is no longer visible,
when the cover triangle section
is viewed from above.

Summary of Contents for IQ 2012





























































































































































































































































































































































































































































































Reviews:

No comments