Toyota IQ 2012 Owner'S Manual Download Page 250

Page: 250 / 476

250

3-1. Using the air conditioning system and defogger

iQ_WE_74014E

Right and left side outlets

Direct air flow to the left or
right, up or down.
Turn the knob to open or close
the vent.



Using the automatic mode

Fan speed is adjusted automatically according to the temperature setting
and ambient conditions. As a result, the following may occur.



Immediately after the button is pressed, the fan may stop for a while until
warm or cool air is ready to flow.



Cool air may flow to the area around the upper body when the heater is
on.



Using the system in recirculated air mode

The windows will fog up more easily if the recirculated air mode is used for
an extended period.



Switching between outside air and recirculated air modes

Recirculated air mode or outside air mode may be automatically switched in
accordance with the temperature setting and the inside temperature.



Window defogger feature

Recirculated air mode may automatically switch to outside air mode in situa-
tions where the windows need to be defogged.

Summary of Contents for IQ 2012





























































































































































































































































































































































































































































































Search results

Summary of Contents for IQ 2012

Reviews:

Related manuals for IQ 2012

Brands by name

Popular brands

Toyota IQ 2012, Owner'S Manual

Search results

Summary of Contents for IQ 2012

Reviews:

Related manuals for IQ 2012

Brands by name

Popular brands