Toyota Highlander Hybrid 2020 Page 178 Owner'S Manual Download

Page: 178 / 572

178

3-4. Adjusting the steering wheel and mirrors

HIGHLANDER HV_U

mirror angle at a desired position

with the shift lever in R.
The adjusted angle will be memo-

rized and the mirror will automati-

cally tilt to the memorized angle

whenever the shift lever is shifted to

R from next time.
The memorized downward tilt posi-

tion of the mirror is linked to the nor-

mal position (angle adjusted with

the shift lever in other than R).

Therefore, if the normal position is

changed after adjustment, the tilt

position will also change.
When the normal position is

changed, readjust the angle in

reversing.

Push the mirror back in the
direction of the vehicle’s rear.

WARNING

■

When the mirror defoggers

are operating

Do not touch the rear view mirror

surfaces, as they can become

very hot and burn you.

Folding the mirrors

Summary of Contents for Highlander Hybrid 2020





























































































































































































































































































































































































































































































































































































Search results

Summary of Contents for Highlander Hybrid 2020

Reviews:

Related manuals for Highlander Hybrid 2020

Brands by name

Popular brands

Toyota Highlander Hybrid 2020, Owner'S Manual

Search results

Summary of Contents for Highlander Hybrid 2020

Reviews:

Related manuals for Highlander Hybrid 2020

Brands by name

Popular brands