manualshive.com logo in svg

Toyota Highlander Hybrid 2020, Owner'S Manual

Share
Download
Toyota Highlander Hybrid 2020 Owner'S Manual Download Page 205

205

4-1. Before driving

HIGHLANDER HV_U

4

Dr

iv

ing

Rear GAWR

■

TWR (Trailer Weight Rating)

The maximum allowable gross 
trailer weight. The gross trailer 
weight is the sum of the trailer 
weight and the weight of the 
cargo in the trailer.
TWR is calculated assuming 
base vehicle with one driver, 
one front passenger, towing 
package (if available), hitch and 
hitch systems (if required).

Additional optional equipment, pas-
sengers and cargo in the vehicle 
will reduce the trailer weight rating 
so as not to exceed GCWR, GVWR 
and GAWR.
If the gross trailer weight exceeds 
3000 lb. (1360 kg), it is recom-
mended to use a trailer with 2 or 
more axles.

With brakes

■

Unbraked TWR (Unbraked 
Trailer Weight Rating)

The trailer weight rating for tow-
ing a trailer without a trailer ser-
vice brake system.

Without brakes

■

Tongue Weight

The load placed on the trailer 
hitch ball. (

P.206)

The gross trailer weight must 
never exceed the TWR 
described in the table. 
(

P.206)

The gross combination weight 
must never exceed the 
GCWR described in the table. 
(

P.206)

The gross vehicle weight 
must never exceed the 
GVWR indicated on the Certi-
fication Label. (

P.504)

The gross axle weight on 
each axle must never exceed 
the GAWR indicated on the 

Weight limits

Summary of Contents for Highlander Hybrid 2020





























































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands