Toyota Highlander Hybrid 2020 Page 157 Owner'S Manual Download

Page: 157 / 572

157

3-3. Adjusting the seats

HIGHLANDER HV_U

Before driv

ing

Stow the second seat belt
buckles.

Pass the outer seat belts
through the seat belt hangers
and secure the seat belt
plates.

This prevents the shoulder belts

from being damaged.

Lower the head restraints to
the lowest position. (



P.162)

■

Folding down the second
seats

Pull the seatback angle
adjustment lever or to
tilt the seatback forward.

Each seatback may be folded sep-

arately.

Pull the seatback folding
lever to unlock the seatback.
The seatback will be folded
down.

■

After folding down the sec-
ond seats

Slide the folded second seats
backward until they lock.

Summary of Contents for Highlander Hybrid 2020





























































































































































































































































































































































































































































































































































































Search results

Summary of Contents for Highlander Hybrid 2020

Reviews:

Related manuals for Highlander Hybrid 2020

Brands by name

Popular brands

Toyota Highlander Hybrid 2020, Owner'S Manual

Search results

Summary of Contents for Highlander Hybrid 2020

Reviews:

Related manuals for Highlander Hybrid 2020

Brands by name

Popular brands