Toyota Highlander Hybrid 2020 Page 367 Owner'S Manual Download

Page: 367 / 572

367

5-4. Using the storage features

HIGHLANDER HV_U

Interior

featur



Center deck under tray

Pull the strap upwards to open
the center deck board.



Deck side box (if equipped)

Pull the strap upwards to open
the side deck board.

WARNING

■

Luggage cover

●

When installing/stowing the lug-

gage cover, make sure that the

luggage cover is securely

installed/stowed. Failure to do

so may result in serious injury in

the event of sudden braking or a

collision.

●

Do not place anything on the

luggage cover. In the event of

sudden braking or turning, the

item may go flying and strike an

occupant. This could lead to an

unexpected accident, resulting

in death or serious injury.

●

Do not allow children to climb

on the luggage cover. Climbing

on the luggage cover could

result in damage to the luggage

cover, possibly causing death or

serious injury to the child.

●

Do not point the luggage cover

unit at your face or body, as

doing so may cause injuries if

the cover ends extend sud-

denly.

NOTICE

■

When using the luggage

cover

●

Do not put heavy items on the

luggage cover.

●

Install the cover unit in the cor-

rect direction so that the lock

release button faces upward.

Auxiliary boxes

WARNING

■

Caution while driving

Keep the deck board closed. In

the event of sudden braking, an

accident may occur due to an

occupant being struck by the deck

board or the items stored under

the deck board.

Summary of Contents for Highlander Hybrid 2020





























































































































































































































































































































































































































































































































































































Search results

Summary of Contents for Highlander Hybrid 2020

Reviews:

Related manuals for Highlander Hybrid 2020

Brands by name

Popular brands

Toyota Highlander Hybrid 2020, Owner'S Manual

Search results

Summary of Contents for Highlander Hybrid 2020

Reviews:

Related manuals for Highlander Hybrid 2020

Brands by name

Popular brands