manualshive.com logo in svg

Toyota Highlander Hybrid 2020, Owner'S Manual, Page: 316 / 572

Share
Download
Toyota Highlander Hybrid 2020 Owner'S Manual Download Page 316

316

4-5. Using the driving support systems

HIGHLANDER HV_U

• When a vehicle turns into the 

detection area

Multi-information display
Driving mode select switch

Operate the driving mode select 
switch forward or backward to 
select the desired driving mode on 
the multi-information display.

1

Normal mode

Provides an optimal balance of fuel 
economy, quietness, and dynamic 
performance. Suitable for normal 
driving.

2

Sport mode

Controls the hybrid system to pro-
vide quick, powerful acceleration. 
This mode also changes the steer-
ing feel, making it suitable for when 
agile driving response is desired, 
such as when driving on roads with 

Driving mode select 

switch

The driving modes can be 
selected to suit the driving 
and usage conditions.

Selecting a driving mode

Summary of Contents for Highlander Hybrid 2020





























































































































































































































































































































































































































































































































































































Reviews:

No comments