Toyota Highlander Hybrid 2020 Page 364 Owner'S Manual Download

Page: 364 / 572

364

5-4. Using the storage features

HIGHLANDER HV_U

Pull down the hook to use.

The cargo hooks are provided for
securing loose items.

To hang the cargo net, use the
cargo net hooks and cargo
hooks.

■

Removing the luggage
cover unit (vehicles with-
out side deck board)

Fold down the third seats.
(



P.158)

Luggage compart-

ment features

Cargo hooks

WARNING

■

When cargo hooks are not in

use

To avoid injury, always return the

hooks to their stowed positions

when not in use.

Cargo net hooks

WARNING

■

When the cargo net is not in

use

To avoid injury, always return the

hooks to their stowed positions

when not in use.

Grocery bag hooks

NOTICE

■

To prevent damage to the gro-

cery bag hooks

Do not hang any object heavier

than 6.6 lb. (3 kg) on the grocery

bag hooks.

Luggage cover (if
equipped)

Summary of Contents for Highlander Hybrid 2020





























































































































































































































































































































































































































































































































































































Search results

Summary of Contents for Highlander Hybrid 2020

Reviews:

Related manuals for Highlander Hybrid 2020

Brands by name

Popular brands

Toyota Highlander Hybrid 2020, Owner'S Manual

Search results

Summary of Contents for Highlander Hybrid 2020

Reviews:

Related manuals for Highlander Hybrid 2020

Brands by name

Popular brands