Toyota COROLLA 2011 Quick Reference Manual Download Page 81

Page: 81 / 524

1-3. Adjustable components (seats, mirrors, steering wheel)

Before driving

Seat belt comfort guide (outside rear seats)

If the shoulder belt sits close to a person's neck, use the seat belt
comfort guide.

Pull out the comfort guide from
the pocket.

Slide the belt past the slot of the
guide.

The elastic cord must be behind
the seat belt.

■

Adjusting the height of the belt (front seats)

Push the seat belt shoulder
anchor down while pressing
the release button.
Push the seat belt shoulder
anchor up.

Move the height adjuster up
and down as needed until you
hear a click.

STEP

Summary of Contents for COROLLA 2011













































































































































































































































































































































































































































































































































Search results

Summary of Contents for COROLLA 2011

Reviews:

Related manuals for COROLLA 2011

Brands by name

Popular brands

Toyota COROLLA 2011, Quick Reference Manual

Search results

Summary of Contents for COROLLA 2011

Reviews:

Related manuals for COROLLA 2011

Brands by name

Popular brands