Toyota COROLLA 2011 Quick Reference Manual Download Page 222

Page: 222 / 524

221

3-2. Using the audio system

Inte
rior fe

atures

■

All CDs (type C only)

Press

(RDM) twice.

Tracks on all loaded CDs are played in random order.

To cancel, press the button again.

Repeat play

■

Repeating a track

Press

(RPT) or

(RPT).

To cancel, press the button once more (type A and B), or twice more
(type C).

■

Repeating all of the tracks on a CD (type C only)

Press

(RPT) twice.

To cancel, press the button again.

Switching the display

Press

or .

Each time

is pressed, the display changes in the

following order:

Type A: Track no./Elapsed time

→

CD title

→

Track name.

Type B and C: Track title

→

Track name/Artist name

→

Track name/

Elapsed time.

Summary of Contents for COROLLA 2011













































































































































































































































































































































































































































































































































Search results

Summary of Contents for COROLLA 2011

Reviews:

Related manuals for COROLLA 2011

Brands by name

Popular brands

Toyota COROLLA 2011, Quick Reference Manual

Search results

Summary of Contents for COROLLA 2011

Reviews:

Related manuals for COROLLA 2011

Brands by name

Popular brands