Toyota COROLLA 2011 Quick Reference Manual Download Page 184

Page: 184 / 524

161

2-3. Operating the lights and wipers

Wh
en drivin

■

The windshield wipers and washers can be operated when

Vehicles with smart key system

The “ENGINE START STOP” switch is in IGNITION ON mode.

Vehicles without smart key system

The engine switch is in the “ON” position.

■

If no windshield washer fluid sprays

Check that the washer nozzles are not blocked and if there is washer fluid in
the windshield washer fluid reservoir.

NOTICE

■

When the windshield is dry

Do not use the wipers, as they may damage the windshield.

■

When there is no washer fluid spray from the nozzle

Damage to the washer fluid pump may be caused if the lever is pulled
toward you and held continually.

■

When a nozzle becomes blocked

In this case, contact your Toyota dealer.
Do not try to clear it with a pin or other object. The nozzle will be damaged.

Summary of Contents for COROLLA 2011













































































































































































































































































































































































































































































































































Search results

Summary of Contents for COROLLA 2011

Reviews:

Related manuals for COROLLA 2011

Brands by name

Popular brands

Toyota COROLLA 2011, Quick Reference Manual

Search results

Summary of Contents for COROLLA 2011

Reviews:

Related manuals for COROLLA 2011

Brands by name

Popular brands