Toyota COROLLA 2011 Quick Reference Manual Download Page 125 | Manualshive

Page: 125 / 524

background image

101

1-7. Safety information

1

Before driving

CAUTION

■

Front passenger occupant classification system precautions

●

Do not recline the front passenger seatback so far that it touches a rear
seat. This may cause the “PASSENGER AIR BAG OFF” indicator light to
be illuminated, which indicates that the passenger’s airbags will not deploy
in the event of a severe accident. If the seatback touches the rear seat,
return the seatback to a position where it does not touch the rear seat.
Keep the front passenger seatback as upright as possible when the vehi-
cle is moving. Reclining the seatback excessively may lessen the effec-
tiveness of the seat belt system.

●

If an adult sits in the front passenger seat, the “PASSENGER AIR BAG
ON” indicator light is illuminated. If the “PASSENGER AIR BAG OFF” indi-
cator is illuminated, ask the passenger to sit up straight, well back in the
seat, feet on the floor, and with the seat belt worn correctly. If the
“PASSENGER AIR BAG OFF” indicator still remains illuminated, either
ask the passenger to move to the rear seat, or if that is not possible, move
the front passenger seat fully rearward.

●

When it is unavoidable to install the forward-facing child restraint system
on the front passenger seat, install the child restraint system on the front
passenger seat in the proper order. (

→

P. 106)

●

Do not modify or remove the front seats.

●

Do not kick the front passenger seat or subject it to severe impact. Other-
wise, the SRS warning light may come on to indicate a malfunction of the
detection system. In this case, contact your Toyota dealer immediately.

●

Child restraint systems installed on the rear seat should not contact the
front seatbacks.

●

Do not use a seat accessory, such as a cushion or seat cover, that covers
the seat cushion surface.

●

Do not modify or replace the upholstery of the front seat.

«
...
123
124
125
126
127
...
»

Summary of Contents for COROLLA 2011













































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for COROLLA 2011

Brand: Pivot Pages: 4

Brand: Honda Pages: 73

Brand: Taffio Pages: 8

BTFREQ PRO BTFMPD3SR

Brand: Scosche Pages: 16

Brand: Hyundai Pages: 11

Brand: THIEYE Pages: 88

Brand: RAM Pages: 330

Brand: Ranger design Pages: 22

Brand: Magneti Marelli Pages: 2

Brand: Mitsubishi Pages: 284

Brand: Jackson Racing Pages: 14

Brand: Front Runner Pages: 7

Brand: Honda Pages: 41

Brand: DV8 Pages: 11

Brand: Kia Pages: 714

Brand: Farenheit Pages: 8

Brand: Rugged Ridge Pages: 3

Brand: RUD Pages: 10

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands