Toyota COROLLA 2011 Quick Reference Manual Download Page 229

Page: 229 / 524

228

3-2. Using the audio system

Repeat play

■

Repeating a file

Press

(RPT) or

(RPT).

To cancel, press the button once more (type A), twice more (type B) or
three times (type C).

■

Repeating all of the files on a folder

Type A
Press and hold

(RPT) until you hear a beep.

To cancel, press the button again.

Type B and C

Press

(RPT) twice.

To cancel, press the button once more (type B), or twice more (type C).

■

Repeating all of the files in a disc (type C only)

Press

(RPT) three times.

To cancel, press the same button again.

Switching the display

Press

or .

Each time

is pressed, the display changes in the

following order:

Type A: Folder no./File no./Elapsed time

→

Folder name

→

File name

→

Album title (MP3 only)

→

Track title

→

Artist name.

Type B and C: Track title

→

Track title/Artist name

→

Track title/Album

name (MP3 only)

→

Track title/Elapsed time.

Summary of Contents for COROLLA 2011













































































































































































































































































































































































































































































































































Search results

Summary of Contents for COROLLA 2011

Reviews:

Related manuals for COROLLA 2011

Brands by name

Popular brands

Toyota COROLLA 2011, Quick Reference Manual

Search results

Summary of Contents for COROLLA 2011

Reviews:

Related manuals for COROLLA 2011

Brands by name

Popular brands