Toyota COROLLA 2011 Quick Reference Manual Download Page 326

Page: 326 / 524

325

3-7. Other interior features

Inte
rior fe

atures

Cigarette lighter

∗

■

The cigarette lighter can be used when

Vehicles with smart key system

The “ENGINE START STOP” switch is in ACCESSORY or IGNITION ON
mode.

Vehicles without smart key system

The engine switch is in the “ACC” or “ON” position.

CAUTION

■

When not in use

Keep the lid closed.
Injuries may result in the event of an accident or sudden braking.

■

To avoid burns or fires

●

Do not touch the metal parts of the cigarette lighter.

●

Do not hold the cigarette lighter down. It could overheat and cause a fire.

●

Do not insert anything other than the cigarette lighter into the outlet.

Pull the lid to open, and push
the cigarette lighter down.

The cigarette lighter will pop up
when it is ready for use.

∗

: If equipped

Summary of Contents for COROLLA 2011













































































































































































































































































































































































































































































































































Search results

Summary of Contents for COROLLA 2011

Reviews:

Related manuals for COROLLA 2011

Brands by name

Popular brands

Toyota COROLLA 2011, Quick Reference Manual

Search results

Summary of Contents for COROLLA 2011

Reviews:

Related manuals for COROLLA 2011

Brands by name

Popular brands