FI·7
8
.
Care is raquired when pulling
out
and inset1ing wiring con·
necto".
tal
Release the lock and pull out the connector, pulling
on the connectolS.
Ibl Fully Insert the connector and check that it Is locked.
9.
When inspecting
8
connector with a volt/Ohmmeter
.
ial Carefully take out the water-ploofing rubber if it is
8
water-ploof type connector.
Ibl Insert the test probe into the connector from wiring
side wl1en checking the continuity, amperage or
voltage
lei
00
not apply unnecessary fon::e to the terminal
ldl Alter checking, install the water-proofing rubber on
the connector securely.
10. Use
SST
for inspection or
18$1
of the injector, cold start
Injector or Its wiring conllllClor.
SST
wlo Air flow meter
09842-30050 IAI and 09842-30060
(8)
wI Air flow meter
09842-30050 IAI and 09842-30070 (CI
