U·GE
EM-13S
Ie)
Subtract the piston pin diameter measurement from
the
bushing
inside dii!lmeter mei!lsurement.
Standllrd 011 clearance:
0.004
-
O.OOS
mm
10.0002 - 0.0003
In.)
Maximum 011
cleari!lnee:
0.06
mm
(0.0020
In.)
If
clearance is
greatef than maximum, feplace the
bushing.
II
fl8i;tlS$Bry,
replace the piston afld
piston
pin
assembly.
8.
{"A·GE)
IF NECESSARY, REPLACE CONNECTING ROD
SUSHINGS
(a)
Using SST and a press, push out the bushing.
SST
09222-30010
Ib}
Aligfl the oil holes of
the
bushing and connecting rod.
((:1
Using SST and a press. press in the bushing.
SST
09222-30010
Ill)
Using a pin hole grindef, hone
the bushing
to
obtain
the standard specified clearance (See step
7)
be
tween the bushing and piston pin.
(&1 Check
the piston
pin fit at normal room temperatu
r
e
.
Coat
the
pi
s
to
n pin with engine
oil
and push it into
the
connecting
rod with
yOUf thumb.
