CO·1S
6.O m.
4.
INSTALL ROTOR
lal
InstaM a new paoc::king and ,eat into the rotor.
lbl Apply a liltle
LLC
to the seal and rOlor contact sur
hn:e.
leI
U,ing I press. instIll I new rotor on the water pump
bearing shaft.
NOTE:
A, shown in the figure. the distance from the
rotor edge
to
the installotion surface of the
pump
body
should be
6.0
mm
10.236
in.l
5.
CHECK WATER PUMP
After assembly mllke sure thai the rotor rotlltes smoothly
.
6.
INSTALL WATER PUMP SUCTION COVER
Inslali the water pump suction COyer on a new gasket with
three bolts.
Torque;
95
kg-em
(82
i
n
.
-
I
b
.
9.3
N
·
m
)
NOTE:
After inslailing. make sure Ihatthe rotor is not
i
contact with the waler pump suction cover.
