ST·10
ASSEMBLY OF CONVENTIONAL TYPE
STARTER
ISee page
ST -41
NOTE:
Use high-temperature grene to lubricate
the
bearings and sliding parts when assemblying the
s
lIlfter
.
1 . ASSEMBLE STARTER CLUTCH TO ARMATURE
lei
Piece a
n
ew stop col18l" on the armature.
Ibl Drive in the snap ring with ,
14
mm
(0.55
inJ soekel
wrench. Ihen fil it into the shah groove.
lei
Using a vise. compress the snap ring
Meke sure that the snap ring fits correctly.
kli
Using a screwdriver. tiP the pinion to slide the stop
collar onto the snap
ring.
2.
ASSEMBLE CAlVE LEVER TO CRIVE HOUSING AND
FiElD FRAME TO ARMATURE
lal Apply grea$l to the drive lever and drive housing
bu.hing.
Ibl Install the drive IIIv." to the drive housing.
Icl Instatl the field frame on the
ermatu
re
.
