Toyota 2GR-FE, Manual

Page: 136 / 1021

2GR-FE ENGINE MECHANICAL – ENGINE UNIT
EM–135
EM
34. INSTALL NO. 2 CHAIN TENSIONER ASSEMBLY
(a) Install the No. 2 chain tensioner with the bolt.
Torque: 21 N*m (214 kgf*cm, 15 ft.*lbf)
(b) While pushing in the tensioner, insert a pin of
φ
1.0
mm (0.039 in.) into the hole to fix it.
35. INSTALL CAMSHAFT TIMING GEARS AND NO. 2
CHAIN (for Bank 1)
(a) Align the mark plate (yellow) with the timing marks
(1-dot mark) of the camshaft timing gears as shown
in the illustration.
(b) Apply a light coat of engine oil to the bolt threads
and bolt-seating surface.
(c) Align the knock pin of the camshaft with the pin hole
of the camshaft timing gear. Install the camshaft
timing gear and camshaft timing exhaust gear RH
with the No. 2 chain installed.
(d) Hold the hexagonal portion of the camshaft with a
wrench, and tighten the 2 bolts.
Torque: 100 N*m (1,020 kgf*cm, 74 ft.*lbf)
(e) Remove the pin from the chain tensioner.
Push
Pin
Plunger
A121265E02
Timing Marks
Mark Plate
A124048E02
Hold
Turn
A121640E01