Toyota 2006 TACOMA User Manual Download Page 40

Page: 40 / 422

2006 TACOMA from Jan.’06 Prod. (OM35865U)

LS12042

Do not bend the key grip.

Do not cover the key grip with any
material that cuts off electromagnet-
ic waves.

Do not knock the key hard against
other objects.

Do not leave the key exposed to
high temperatures for a long period,
such as on the dashboard and hood
under direct sunlight.

Do not put the key in water or
wash it in an ultrasonic washer.

Do not use the key with electromag-
netic materials.

LS12043

KEY NUMBER PLATE

Your key number is shown on the plate.
Keep the plate in a safe place such as
your wallet, not in the vehicle.

If you should lose your keys or if you
need additional keys, duplicates can be
made by a Toyota dealer using the key
number.

We recommend writing down the key num-
ber and storing it in a safe place.

06 01.06

carownersmanual.net

Summary of Contents for 2006 TACOMA







































































































































































































































































































































































































































Search results

Summary of Contents for 2006 TACOMA

Reviews:

Related manuals for 2006 TACOMA

Brands by name

Popular brands

Toyota 2006 TACOMA, User Manual

Search results

Summary of Contents for 2006 TACOMA

Reviews:

Related manuals for 2006 TACOMA

Brands by name

Popular brands