Toyota 2006 TACOMA User Manual Download Page 147

Page: 147 / 422

121

2006 TACOMA from Jan.’06 Prod. (OM35871U)

LS13066

TO USE THE ANCHOR BRACKET:

1. Remove the head restraint.

LS13067

2. Pull the seatback release strap and

swing the seatback forward slightly,
then latch the hook onto the anchor
bracket.

Return the seatback to its original
position.

LS13068

3. Fix the child restraint system with

the seat belt and tighten the top
strap.

Replace the head restraint.

For instructions on installing the child re-
straint system, see “Child restraint” on
page 90 in this Section.

06 04.25

carownersmanual.net

Summary of Contents for 2006 TACOMA







































































































































































































































































































































































































































Search results

Summary of Contents for 2006 TACOMA

Reviews:

Related manuals for 2006 TACOMA

Brands by name

Popular brands

Toyota 2006 TACOMA, User Manual

Search results

Summary of Contents for 2006 TACOMA

Reviews:

Related manuals for 2006 TACOMA

Brands by name

Popular brands