Toyota 2006 TACOMA User Manual Download Page 67

Page: 67 / 422

2006 TACOMA from Jan.’06 Prod. (OM35871U)

LS13183

2. Make sure the shoulder belt passes

through the hanger when folding the
rear seat.

This prevents the shoulder belt from being
damaged.

CAUTION

The seat belt must be removed from
the hanger when the seat belt is in
use.

LS13150b

FOLDING REAR SEATS

1. Swing the bottom cushion up by

pulling the lock release strap, and
remove the head restraint.

If desired, each bottom cushion may be
raised separately.

NOTICE

To prevent damage to the box under
the seat, do not sit on the box when
the bottom cushion is in the raised
position.

LS13151

2. Attach the head restraints to the

holders located on the back sides of
the bottom cushions.

06 04.25

carownersmanual.net

Summary of Contents for 2006 TACOMA







































































































































































































































































































































































































































Search results

Summary of Contents for 2006 TACOMA

Reviews:

Related manuals for 2006 TACOMA

Brands by name

Popular brands

Toyota 2006 TACOMA, User Manual

Search results

Summary of Contents for 2006 TACOMA

Reviews:

Related manuals for 2006 TACOMA

Brands by name

Popular brands