Toyota 2006 TACOMA User Manual Download Page 65

Page: 65 / 422

2006 TACOMA from Jan.’06 Prod. (OM35871U)

LS13154

1. Pull the seatback angle adjusting le-

ver and raise the seatback to its up-
right position.

LS13155

2. Pull the seatback folding lever and

fold the seatback down.

LS13156

You should use the seatback as a tempo-
rary table only when the vehicle is
stopped.

CAUTION

To avoid serious injury:

Do not set up the seatback table
while the vehicle is moving.

Do not sit on the folded seatback.

Make sure the front passenger’s
seat is securely locked in sliding
position when you set the seat as
a temporary table.

06 04.25

—Folding front passenger’s
seat (on some models)

carownersmanual.net

Summary of Contents for 2006 TACOMA







































































































































































































































































































































































































































Search results

Summary of Contents for 2006 TACOMA

Reviews:

Related manuals for 2006 TACOMA

Brands by name

Popular brands

Toyota 2006 TACOMA, User Manual

Search results

Summary of Contents for 2006 TACOMA

Reviews:

Related manuals for 2006 TACOMA

Brands by name

Popular brands