Toyota 2006 TACOMA User Manual Download Page 141

Page: 141 / 422

115

2006 TACOMA from Jan.’06 Prod. (OM35871U)

Use the routing device and the anchor
bracket on the back panel to attach the
top strap.

Anchor brackets are installed for (each)
passenger seating position.

This symbol indicates the locations of the
anchor brackets.

LS13063

TO USE THE ANCHOR BRACKET:

1. Remove the passenger head re-

straint.

LS13181

Symbol
mark

2. Lightly push down on the top sur-

face of the routing device cover with
the symbol mark shown in the il-
lustration, then pull it forward to re-
move.

06 04.25

carownersmanual.net

Summary of Contents for 2006 TACOMA







































































































































































































































































































































































































































Search results

Summary of Contents for 2006 TACOMA

Reviews:

Related manuals for 2006 TACOMA

Brands by name

Popular brands

Toyota 2006 TACOMA, User Manual

Search results

Summary of Contents for 2006 TACOMA

Reviews:

Related manuals for 2006 TACOMA

Brands by name

Popular brands