Toyota 2004 Yaris Owner'S Manual Download Page 123

Page: 123 / 229

123

2005 ECHO HATCHBACK from Jul. ’04Prod. (OM52624U)

All season tires, however, do not have

adequate traction performance

compared with snow tires in heavy or

loose snow. Also, all season tires fall

short in acceleration and handling

performance compared with summer

tires in highway driving.
The details about how to distinguish

summer tires from all season tires are

described on page 108.

CAUTION

Do not mix summer and all sea-

son tires on your vehicle as

this can cause dangerous han-

dling characteristics, resulting

in loss of control.

Do not use tires other than the

manufacturer’s designated

tires, and do not mix tires or

wheels of the sizes different

from the originally equipped

tires and wheels as this can

cause dangerous handling

characteristics, resulting in

loss of control.

04 05.18

Summary of Contents for 2004 Yaris






































































































































































































































Search results

Summary of Contents for 2004 Yaris

Reviews:

Related manuals for 2004 Yaris

Brands by name

Popular brands

Toyota 2004 Yaris, Owner'S Manual

Search results

Summary of Contents for 2004 Yaris

Reviews:

Related manuals for 2004 Yaris

Brands by name

Popular brands