Toyota 2004 Yaris Owner'S Manual Download Page 48

Page: 48 / 229

2005 ECHO HATCHBACK from Jul. ’04Prod. (OM52624U)

CAUTION

Make sure the top strap is securely
latched, and check that the child

restraint system is secure by push-

ing and pulling it in different direc-
tions.

Follow all the installation instructions

provided by its manufacturer.

SU13244a

4. Replace the head restraint.

Be sure to close the cover when the an-
chor bracket is not in use.

SU13228c

The lower anchorages for the child re-

straint system interfaced with the
FMVSS225 or CMVSS210.2 specification

are installed in the rear seat.

The anchorages are installed in the gap

between the seat cushion and seatback of

both outside rear seats.
Child restraint system interfaced with the

FMVSS213 or CMVSS213 specification

can be fixed with these anchorages. In
this case, it is not necessary to fix the

child restraint system with a seat belt on

the vehicle.

04 05.28

—Installation with child

restraint lower anchorages

Summary of Contents for 2004 Yaris






































































































































































































































Search results

Summary of Contents for 2004 Yaris

Reviews:

Related manuals for 2004 Yaris

Brands by name

Popular brands

Toyota 2004 Yaris, Owner'S Manual

Search results

Summary of Contents for 2004 Yaris

Reviews:

Related manuals for 2004 Yaris

Brands by name

Popular brands