Toyota 2004 Yaris Owner'S Manual Download Page 43

Page: 43 / 229

2005 ECHO HATCHBACK from Jul. ’04Prod. (OM52624U)

SU13220b

2. Fully extend the shoulder belt to put it

in the lock mode. When the belt is
then retracted even slightly, it cannot

be extended.

To hold the convertible seat securely,

make sure the belt is in the lock mode

before letting the belt retract.

SU13221b

3. While pressing the convertible seat

firmly against the seat cushion and
seatback, let the shoulder belt retract

as far as it will go to hold the convert-

ible seat securely.

SU13222b

CAUTION

Push and pull the child restraint sys-
tem in different directions to be sure

it is secure. Follow all the installation

instructions provided by its manufac-
turer.

04 05.28

Summary of Contents for 2004 Yaris






































































































































































































































Search results

Summary of Contents for 2004 Yaris

Reviews:

Related manuals for 2004 Yaris

Brands by name

Popular brands

Toyota 2004 Yaris, Owner'S Manual

Search results

Summary of Contents for 2004 Yaris

Reviews:

Related manuals for 2004 Yaris

Brands by name

Popular brands