Toyota 2004 Yaris Owner'S Manual Download Page 19

Page: 19 / 229

2005 ECHO HATCHBACK from Jul. ’04Prod. (OM52624U)

SU13117

For easy access to the rear seat:

1. Lift the seatback angle adjusting lever

or press the pedal behind the seat-

back.
The seat will slide forward.

2. Move the seat to the front

−

most posi-

tion.

After passengers are in, lift up the seat-

back and return the seat until it locks.

CAUTION

After putting back the seat, try
pushing the seat forward and rear-

ward to make sure it is secured in

place.

Never allow anyone to rest their

foot on the release pedal while the

vehicle is moving.

Fold

−

down rear seat

SU13248a

(A) BEFORE FOLDING REAR SEAT
Make sure the shoulder belt passes
through the hanger when folding the

seatback down (or returning the seat-
back to the upright position).

This prevents the shoulder belt from being

damaged.

CAUTION

Do not operate the seat while the
vehicle is moving.

The seat belt must be removed

from the hanger when the seat belt
is in use.

04 05.28

—Moving passenger’s seat for

rear seat entry

−

door models)

Summary of Contents for 2004 Yaris






































































































































































































































Search results

Summary of Contents for 2004 Yaris

Reviews:

Related manuals for 2004 Yaris

Brands by name

Popular brands

Toyota 2004 Yaris, Owner'S Manual

Search results

Summary of Contents for 2004 Yaris

Reviews:

Related manuals for 2004 Yaris

Brands by name

Popular brands