Toyota 2004 Yaris Owner'S Manual Download Page 93

Page: 93 / 229

2005 ECHO HATCHBACK from Jul. ’04Prod. (OM52624U)

Auxiliary boxes

SU19004a

Instrument panel

To use the box, pull on the handle.

This auxiliary box can be used to store

the first

−

aid kit.

SU19005

Passenger’s seat

To use the box, slightly lift up the box

and pull it out as shown in the illustra-

tion.

CAUTION

To reduce the chance of injury in
case of an accident or a sudden stop,

always keep the auxiliary box closed

while driving.

NOTICE

Instrument panel: During hot weather,
the interior of the vehicle becomes

very hot. Do not leave anything flam-

mable or deformable such as a light-
er, glasses, etc. inside.

04 04.06

Summary of Contents for 2004 Yaris






































































































































































































































Search results

Summary of Contents for 2004 Yaris

Reviews:

Related manuals for 2004 Yaris

Brands by name

Popular brands

Toyota 2004 Yaris, Owner'S Manual

Search results

Summary of Contents for 2004 Yaris

Reviews:

Related manuals for 2004 Yaris

Brands by name

Popular brands