TOX EPW400, Operating Manual, Page: 64 / 118

Operating the device
64
OM 100.EPW400.202002.en

Tap on 'Begin Y' to set the value to '0'.

Change the mode to 'Teach new', or to 'Teach' if previously taught curves are to
be retained.

Go to the 'Main menu'.

Draw the required number of curves (measure).

Go to the 'Envelope' menu again.

Using SX and/or SY, move the upper / lower envelope horizontally / vertically by
entering the desired value.
The upper / lower envelope can be limited or expanded horizontally using Begin
X / End X and limited or expanded vertically using Begin Y / End Y.

Go to 'Evaluate' mode.

Go to the 'Main menu'.

The curves will now be recorded, and evaluated on the basis of the envelope and
any windows that have been set.