TOX EPW400, Operating Manual, Page: 58 / 118

Operating the device
58
OM 100.EPW400.202002.en
Window 'Mean value X'
The selected window is positioned with reference to the last specified OK curves
stored (mean value X)
The position can be defined using the 'Absolute distance lower limit' and 'Absolute
distance upper limit' values.
The "Number of mean values" field specifies the number of OK curves used for the
calculation.
Proceed as follows:

Tap on the input field in front of 'Absolute distance lower limit'.
The input window containing the numerical keypad appears.

Enter the distance lower limit using the numerical keypad (enter a decimal point
before any decimal places; if no decimals places are entered, the display will show
two decimal places '.00').

Confirm the entry with the 'ENTER' button.

Tap on the input field in front of 'Absolute distance upper limit'. The input window
containing the numerical keypad appears.

Enter the distance upper limit using the numerical keypad (enter a decimal point
before any decimal places; if no decimals places are entered, the display will
show two decimal places '.00').

Confirm the entry with the 'ENTER' button.
The 'Change window side' button switches between 'left-hand side high-
lighted', 'right-hand side highlighted', 'top highlighted', 'bottom highlight-
ed' and 'entire window highlighted'. The corresponding side can also be
highlighted by tapping the line of the window. The whole window is high-
lighted by tapping in the centre of the window.