Fig. #18
Fig. #19
Fig. #20
1. The adjustable lintel assembly has two
orientations for desired finishing. The
flanged edge and the hemmed edge.
The lintel comes factory installed with
the flange edge out . If the desired edge
is different from the factory setting, use
the following steps to change it (Fig.#18).
2 Remove saftey barrier screen.
(Fig.#19).
3. Remove the window trim from the window
frame.
4. Loosen the securing bolts in the upper
and lower corners on each side of the
lintel and remove the lintel. Rotate the
assembly to have the desired edge away
from the fireplace(Fig .#20).
5. The lintel assembly can then be adjusted
to align flush with your facing material by
sliding in or out approximately 1”.
6 Tighten the securing bolts. (Fig.#20).
7. Re-attach the window trim.
8. Reinstall safety barrier screen.
HEMMED EDGE
FLANGED EDGE
SAFETY BARRIER
SCREEN
Fig. #21
LINTEL
CLAMPING
SCREW
LINTEL
CLAMPING
SCREW
13
TCWS54_D 281114-44
Summary of Contents for TCWS54 SERIES D
Page 39: ...Fig 65 39 TCWS54_D 281114 44 Wiring Diagram ...
Page 42: ...42 TCWS54_D 281114 44 ...
Page 43: ...43 TCWS54_D 281114 44 ...
