Program Mode
(To preset up to two on and off periods per
day)
The program mode has two settings for
weekdays and two for weekends. The hand
held remote comes with the following pre
programmed settings:
Weekday Program
(Monday through Friday)
Program one (P1) turns ON at 7:00am and
turns OFF at 8:00am
Program two (P2) turns ON at 5:00pm and
turns OFF at 7:00pm
Weekend Program
(Saturday and Sunday)
Program one (P1) turns ON at 9:00am and
turns OFF at 10:00am
Program two (P2) turns ON at 6:00pm and
turns OFF at 9:00pm
Activate the programs by pressing the pro-
gram button on the lower left hand side of
the remote hand set. (Fig #53)
To customize these setting:
1. Hold the program button down until the
display flashes. (P1, weekday ON time
- [Fig #54])
2. Use the up and down buttons to change
the time to the desired ON time.
3. By pressing the OK button, the P1 week-
day OFF time will flash. (Fig #54)
4. Use the up and down buttons to set the
desired OFF time.
5. Press the OK button and the P2 weekday
ON time will flash.
6. Repeat the process to set the P2 week-
day, P1 weekend and P2 weekend pro-
grams.
7. When the P2 OFF time is set and the
OK button is pressed the display will stop
flashing and the remote will be in program
mode.
The program settings are now stored in the remote handset and will not change unless the
above process is repeated or the batteries are removed from the handset.
To switch out of program mode, simply press one of the manual, timer or thermostat mode
buttons. Please note that if the manual button is pressed it will turn the fireplace off.
Fig. #51
TIMER
Fig. #52
TIMER
RUN
DISPLAY
PROGRAM
Fig. #54
Fig. #53
32
TC30_CE3 250313-44
Summary of Contents for TC30.CE3
Page 42: ...42 TC30_CE3 250313 44 Notes ...
