1. Place two smaller magnets on back of each side rail.
2. Place two larger magnets on back of the top and bottom
rails.
3. Attach the side rails. Even the ends up with the door
frame.
4. Attach the top and bottom rails and adjust so mitres
are even at the corners.
5. Place TC magnetic logo in bottom right corner.
Top or bottom rail
Side rails
Larger magnets
Fig. #45a
3. Install the Right Side Panel by inserting the
bottom of the panel in first and then angling
it up into position. It may be necessary to
push the firebox shield up to allow panel to
move freely into place.
4. Install the Rear Upper Panel.
5. Install the Left Side Panel by inserting the
bottom of the panel in first and then angling
it up into position.
6. Re-install the Side Panel Retainers.
7. Install the Left and Right Front Panels.
(HERITAGE RED BRICK PANEL SET
SHOWN)
LEFT SIDE PANEL
REAR UPPER PANEL
FRONT LEFT PANEL
RIGHT SIDE PANEL
FRONT RIGHT PANEL
REAR LOWER PANEL
28
TC30_CE3 250313-44
Fig. #45
Finishing Touch Trim Kit Instructions
Summary of Contents for TC30.CE3
Page 42: ...42 TC30_CE3 250313 44 Notes ...
