Childproof Lock
An additional feature of this remote control is the childproof lock. To activate this system
press and hold the timer and thermostat buttons for approx. 5 seconds until the “lock”
symbol appears on the remote display. (Fig #49) The remote control hand set buttons are
now locked and the lock symbol will reappear every time a button is pressed on the remote
control until the timer and thermostat buttons are pressed and held again.
Note: The fireplace can still be operated normally using the wall control even with the remote
control buttons locked.
Each Town and Country Maestro Control system comes equipped with a manual mode on
the wall control and hand held remote, and three programmable modes accessible with the
hand remote.
Manual Mode
(On remote and wall control)
Basic operation of the fireplace can be performed with the wall control or remote hand set.
(ON / OFF, as well as flame modulation UP/ DOWN).
The center button on the remote control can be used to turn the fireplace ON and OFF.
With the fireplace off, press the center button to turn it on. (The “MAN” and flame icons will
be displayed on the screen) A second push will turn it off. (The “MAN” and flame icons will
disappear from the screen)
When the fireplace is on, the up and down buttons located above and below the center
button are used to modulate the flame height. (Fig #50)
Countdown Timer Mode
(Operates the fireplace for a preset length of time)
1. Press the timer button and the time will flash on the lower center of the display.
(Fig #51)
2. When display is flashing, use the up and down arrows to set the length of time you
would like the fireplace to run. (The range is 10 minutes minimum to 180 minutes
maximum). (Fig #52)
3. Press the OK button and the timer is set and the control is in countdown timer mode.
4. To exit the timer mode press the Program, Manual or Thermostat buttons. Please note
that the first press of the Manual button will turn the fireplace off.
Fig. #49
HOLD
HOLD
FLAME
UP
FLAME
DOWN
ON / OFF
Fig. #50
31
TC30_CE3 250313-
Maestro Control System - Operation
Summary of Contents for TC30.CE3
Page 42: ...42 TC30_CE3 250313 44 Notes ...
