!
GETTING STARTED WITH THE TOWGO APP
DOWNLOADING YOUR APP
You must be connected to the internet in order to download the APP.
Do this step BEFORE you go out somewhere remote.
Download and install the TowGo App onto your phone or tablet by following instructions at:
https://www.towgo.com/downloads
Launch the App. When it finishes starting up, read through the Terms of Use, check the box
at the bottom of the Terms of Use and confirm your acceptance. You will now see the
navigation screen with the virtual trailer.
Periodically, start your App while connected to the internet in order for your
device to detect if there is new software available.
GETTING AROUND THE APP
Along the top center of the screen, you will see three device icons.
!
!
!
!
• Touching the display device icon on the left will bring you to the main display; bars on its
right show the signal strength going to the hitch sensor.
• Touching the trailer sensor icon in the middle will bring you to the trailer sensor connection
screen (if disconnected) and to the trailer sensor setup screen (if connected); bars on its left
show the signal strength going to the display device and bars on its right show the signal
strength going to the steering sensor. Touching the icon again returns you to the main
display.
• Touching the steering sensor icon on the right will bring you to the steering sensor
connection screen (if disconnected) and to the steering sensor setup screen (if connected);
bars on its left show the signal strength going to the trailer sensor. To its bottom right is a
battery charge indicator showing charge level (or a lightening bolt if charging). Touching the
icon again returns you to the main display.
• These and other functions are also available by touching the gear icon on the far right.
13