!
MEASURE THE DISTANCE FROM THE CORD ATTACHMENT POINT TO THE HITCH BALL
The$Hitch$Receiver$Bracket$should$already$be$attached$to$the$hitch$receiver$using$a$ULbolt.$$
$
Measure$the$distance$(
x
)$from$the$centerline$of$the$ULbolt$to$the$centerline$of$the$hitch$ball$as$shown$in$
the$following$drawing:$
$
$
$
$
Measure$using$millimeters$or$inches$(if$inches,$measure$to$the$nearest$1/16$of$an$inch).$The$accuracy$of$
the$overall$system$is$affected$by$how$precisely$you$make$this$measurement.$
$
Note:$the$hitch$receiver$on$some$vehicles$is$located$below$the$vehicle’s$rear$bumper.$In$such$instances,$
the$bracket$can$be$installed$on$the$portion$of$the$hitch$ball$mount$(where$it$is$inserted$into$the$hitch$
receiver).$$
$
10