9
❏
2. Insert the main landing gear wire into the slots. Make
sure the wire is completely seated in the slots.
❏
3. Position the nylon fl at straps over the landing gear wire
and drill 1/16" [1.5mm] pilot holes in the hardwood rails. Don’t
drill through the top of the wing.
❏
4. Secure the fl at straps to the wing with 2x10mm sheet
metal screws and 2mm fl at washers. Remove the screws
and harden the threads in the wood with thin CA. Reinstall
the screws.
❏
5. Look at the upper landing gear covers from the front
to determine the left and right covers.
❏
6. Temporarily slide the upper gear cover over the main
landing gear.
