10
❏
7. Slide the right wheel pant over the right landing gear.
Slide the wheel pant down and position it so that the landing
gear is as far forward as possible. Then, rotate the wheel
pants into position.
❏
8. Slide the upper gear cover over the wheel pant and slide
the wheel pant down so that the axle is exposed.
❏
9. Apply a drop of thread locker to a 3mm set screw. Install
the set screw in a 4mm wheel collar. Slide the wheel collar
on the axle and tighten the set screw.
❏
10. Slide the main wheel on the axle and secure it with a
second 4mm wheel collar and 3mm set screw.
